Mevotech vs Moog Suspension Parts [2020 Comparison] Which Is The Best?

Mevotech vs Moog Suspension Parts [2020 Comparison] Which Is The Best?

The suspension system in your car is made up of many different components and you will need to replace certain parts over the lifetime of your vehicle.

This is why I am writing this Mevotech v Moog suspension parts comparison because they are two well-known brands that make parts for vehicle suspension systems.

These two companies mainly produce control arms, wheel bearings, and ball joints. In this guide, we’ll look at what your suspension system actually does, signs that you may need to replace these parts and which of the two brands produces the best control arm, wheel bearing, and ball joint for your vehicle.

Our Recommendation - Moog Suspension Parts
$77.14
Even though Mevotech is the less expensive option, we recommend going for Moog Suspension Parts because their products generally offer a higher quality which can ultimately pay off in the long run when choosing the best suspension parts for your vehicle.
We earn a commission if you click this link and make a purchase at no additional cost to you.
08/07/2020 05:28 am

Main Differences Between Mevotech vs Moog Suspension Parts

The main differences between Gabriel vs Monroe shocks and struts are:

  • Mevotech components tend to be inexpensive, whereas Moog’s are usually higher priced.
  • Mevotech suspension parts are made in Canada, whereas Moog’s parts are manufactured across the world.
  • Mevotech parts tend to last short, whereas Moog’s parts tend to last longer.
  • Mevotech parts have a limited lifetime warranty, whereas many of Moog’s parts carry a three-year warranty.

What is a suspension system?

suspension system

The suspension system on your vehicle plays a vital role in ensuring that you have a safe and comfortable journey.

The suspension on your car isn’t just one thing – it is actually made up of many different components that all work in tandem with one another. This includes parts such as:

There are many more and I am not going to list them all here but these are the main components you’ll normally hear about.

Your suspension system is designed to absorb all the shocks and bumps that you get with driving. This can be everyday journeys on bumpy roads or even on off-road terrain. Basically it helps to stabilize the vehicle so you have a comfortable drive where you are also in control.

If you ever drive a vehicle that has a very poor suspension system you’ll know all about it. The little bumps on the road that you barely notice in normal circumstances will feel 10x worse. You don’t even need to be a mechanic or an experienced driver to know that there is something wrong with your suspension system as it is pretty noticeable.

Signs you need to replace parts of your suspension

There are different signs that you should look out for that may mean that parts of your suspension system – namely control arms, wheel bearings, and ball joints – need to be replaced.

Screeching noise

When you turn the wheel of your vehicle you shouldn’t hear any screeching or grinding noises however if you do hear this unpleasant sound, it could be a sign that your wheel bearing needs to be replaced. This could happen due to several reasons but regularly driving on uneven roads and contamination of the lubricant are common reasons why this happens.

Less control when steering

Not only does a screeching noise happen if you need to replace certain parts of your suspension system but you may feel a significant loss of control as well. This can be dangerous when driving and it can result in either the wheel seizing up so you are unable to turn properly or having a lack of control over how your vehicle responds.

Increased vibration

When going over bumps and uneven parts of the road, if you experience vibration in your steering wheel then this can also be a sign that you need new parts for your suspension system. This is usually caused by the control arm and while it isn’t necessarily an emergency problem it does need to be addressed.

Excessive tire wear

If the ball joints in your vehicle are worn and need to be replaced this can cause excessive tire wear. It means that your suspension isn’t aligned properly when you drive and the rubber on your tires won’t run along the ground consistently. So, if you have patches on your tires that are clearly worn it could be a sign you need to replace the ball joints in your suspension system and get new tires too.

Features of Mevotech v Moog suspension system parts

parts

Before I show you what the best parts are to buy in this Mevotech v Moog comparison there are some things you should look out for before you make a purchase.

Installing

The good news is that the components of the suspension system that I’m going to show you below are all fairly easy to install.

You don’t really need to be a mechanic or have tons of experience in fitting parts of your vehicle to fit these onto your car. Even if you are inexperienced at installing new car parts, these should only take a couple of hours at most and can be completed in less time as well.

Longevity

When you buy any new part for your car whether it is a suspension system component, new brake pads, or even smaller things like spark plugs – you want to make sure that they are going to last.

There is no point in going for an inferior product if it means that you’ll need to replace that part again in a few months. Most parts of your suspension system have decent longevity and you should need to replace them until you reach over 70,00 miles. That being said, this does depend on how you drive and the types of roads that you drive on too.

Cost

The three components I’m going to compare below from Mevotech and Moog aren’t massively expensive and you won’t need to splash our thousands or even hundreds to replace these parts yourself.

Some components in your vehicle and also within your suspension system can be very expensive. You want to buy a part that is high quality and durable however that doesn’t always mean that you need to spend a lot of money to get it. You can drive down the cost of fitting these new parts yourself as well.

Our top recommendations

I’m going to show you several products from both Mevotech and Moog and show you which one produces the best control arms, wheel bearings, and ball joints.

Control arms

#1 Moog CK620054 Control Arm and Ball Joint Assembly

moog CK620054

The Moog CK620054 Control Arm is one of the very best on the market. Its metal design allows a steady flow of grease which helps to improve its durability while the pre-installed dust boot helps to protect the components from wear and tear and become corroded. The bushings are preinstalled and improve noise when you are driving.

This control arm is compatible with a wide range of different vehicles from sports cars, SUVs, trucks, and performance vehicles too. It is pretty easy to install too which is a bonus if this is your first time replacing a control arm.

Pros

  • Compatible with several vehicle types
  • Design promotes durability
  • Lowers noise when driving due to pre-installed bushings
  • Belleville washers help absorb impacts

Cons

  • Doesn’t come with wire harness clips
We earn a commission if you click this link and make a purchase at no additional cost to you.
08/07/2020 02:35 am

#2 Mevotech MS601043 X-Factor Control Arm

mevotech MS601043

This control arm from Mevotech is compatible with several vehicle types and is designed to handle various types of driving from everyday urban environments to trickier terrain.

It is constructed with natural rubber and comes with the bushings. It’s makeup also means that it is corrosion resistant so you should get good longevity out of this control arm. It has a threaded ball joint stud type and it is easy to install as well which is great if you don’t have a lot of experience of fitting new car parts.

The control arm isn’t adjustable but is a great part if you need to replace this component in your suspension system.

Pros

  • Compatible with several vehicle types
  • Corrosion-resistant
  • Easy to install
  • Affordable price

Cons

  • The ball joint isn’t included in the warranty
We earn a commission if you click this link and make a purchase at no additional cost to you.
08/07/2020 11:29 am

Wheel Bearings

#1 Moog 515036 Wheel Bearing and Hub Assembly

moog 515036

With a simple installation and a reasonable price for what you get, the Moog 515036 Wheel Bearing and Hub Assembly is a great replacement part for your suspension system.

You can use this on a range of vehicles both foreign and domestic and its corrosion and rust prevention to increase its longevity. I’ve found that these wheel bearings offer a really smooth rive without any noticeable noise and it comes with ABS sensors as well. It is designed to handle large load capacities and lessens rolling resistance too.

Pros

  • Can use on both foreign and domestic vehicles
  • Durable with prevention against rust and corrosion
  • Installation is straightforward
  • Comes with ABS sensors

Cons

  • Some reports of ABS sensors needing to be replaced within a year
Our Recommendation - Moog Suspension Parts
$77.14
Even though Mevotech is the less expensive option, we recommend going for Moog Suspension Parts because their products generally offer a higher quality which can ultimately pay off in the long run when choosing the best suspension parts for your vehicle.
We earn a commission if you click this link and make a purchase at no additional cost to you.
08/07/2020 05:28 am

#2 Mevotech H513263 Wheel Bearing and Hub

mevotech H513263

These wheel bearings from Mevotech are a bit cheaper than the Moog parts above however they do help with reducing vibrations, absorbing impacts, and increasing stiffness. This helps with load capacity and a smoother ride for your vehicle.

They also don’t really require any ongoing maintenance either so they should remain in great condition months and potentially years down the line depending on how much you drive. The installation is easy with the wheel bearing too which will appeal to people who don’t have a lot of experience in mechanics.

Pros

  • Perform well to reduce vibrations and noise when driving
  • Contribute to a smooth ride
  • Help to enhance load capacity
  • Easy installation for beginners

Cons

  • Some issues with the sensors and needing to be replaced
We earn a commission if you click this link and make a purchase at no additional cost to you.
08/07/2020 12:28 pm

Ball joints

#1 Mevotech TXK80149 Ball Joint

mevotech txk80149

If you just need a ball joint for your suspension system, the Mevotech TXK80149 is one of the best on the market and it is an area that I would put Mevotech ahead of Moog.

It is inexpensive which is in keeping with most Mevotech products and it is a sturdy and durable ball joint that shouldn’t need to be replaced anytime soon after you fit it. They are designed for heavy-duty and high load capacity while they’re easy to install as well.

Pros

  • Well made product that is durable
  • Inexpensive but is still of high quality
  • Designed for heavy-duty driving
  • Installation is easy

Cons

  • Will need to replace eventually like most ball joints
We earn a commission if you click this link and make a purchase at no additional cost to you.
08/07/2020 08:28 am

#2 Moog K8607T Ball Joint

moog k8607t

This ball joint from Moog is a bit more expensive than the Mevotech one above. It comes with a design that allows grease to flow easily and this will help to reduce corrosion and improve longevity.

The Belleville washer will help to improve impact and absorb shocks whilst driving and you’ll also be able to install this ball joint pretty easily. It can be used on both foreign and domestic vehicles as well. Here you can check more about Kyb vs Monroe Shocks and Struts, and Gabriel vs Monroe Shocks and Struts too!

Pros

  • Durable and will stay in good condition for a long time
  • Absorbs impacts and shocks on the road
  • Use on both foreign and domestic vehicles

Cons:

  • Bit more expensive than the Mevotech model
We earn a commission if you click this link and make a purchase at no additional cost to you.
08/07/2020 10:31 am

Are there any alternatives?

ACDelco

ACDelco 46D1103A

ACDelco is an American company that also produces a variety of suspension parts for a wide range of vehicles. Their products are usually in and around the same price as both Mevotech and Moog and their 46D1103A Advantage Front Upper Suspension Control Arm with Ball Joint is on par with the two I have already mentioned in this comparison article.

We earn a commission if you click this link and make a purchase at no additional cost to you.
08/07/2020 02:35 am

Dorman

dorman

Another American company that is based in Pennsylvania, Dorman produces many parts for your suspension system and they are considered a mid-range manufacturer.

This means they aren’t the cheapest or most expensive but they do produce high-quality components for your car. Their control arms for suspension systems are reasonably priced and offer a wide range of benefits to your vehicle.

We earn a commission if you click this link and make a purchase at no additional cost to you.
08/07/2020 10:31 am

FAQs About Mevotech vs Moog

Where are Mevotech located?

Mevotech is a Canadian company and they are located in Toronto. Their suspension parts are all manufactured in Canada.

Where are Moog located?

Moog is an American company although many of its parts are manufactured around the world.

Is my suspension system important?

Yes, you’ll notice very quickly if you have any problems with your suspension system. The suspension on your car contributes to a smooth ride and also helps to absorb shocks and bumps on the road.

What are the signs my suspension system is faulty?

There are a number of signs to look out for and this includes a screeching noise, wheel locking or not being as responsive, a loss of control when driving, excessive tire wear in certain parts of your and increased vibration when going over uneven or bumpy roads.

Should I drive with a faulty control arm?

It isn’t recommended that you drive if the control arm of your suspension system is faulty. It isn’t an immediate concern but it will have a detrimental impact on how you drive.

Can I install these suspension parts myself?

Yes, even if you don’t have a lot of experience in repairing vehicles, the suspension parts that I have listed in this comparison can be easily installed in under a couple of hours.

Conclusion – Which is Better?

The suspension system on your car plays a vital role in how it functions and runs. If you have any issues with your suspension system this will result in feeling every little bump on the road, losing control of your vehicle, and overall poor driving experience.

This is why you need to buy quality replacement parts if you do need to replace any of the components on your vehicle. Both Mevotech and Moog produce a variety of parts for suspension systems but they are mainly focused on control arms, wheel bearings, and ball joints.

Our Recommendation - Moog Suspension Parts
$77.14
Even though Mevotech is the less expensive option, we recommend going for Moog Suspension Parts because their products generally offer a higher quality which can ultimately pay off in the long run when choosing the best suspension parts for your vehicle.
We earn a commission if you click this link and make a purchase at no additional cost to you.
08/07/2020 05:28 am

Which is the better brand to go with?

I would say Moog edges Mevotech for several reasons. On the one hand, some people prefer Mevotech because they are a bit more inexpensive than Moog however I feel that Moog offers a higher quality product for the most part. This is why I choose the Moog 515036 Wheel Bearing and Hub Assembly and the Moog CK620054 Control Arm ahead of its Mevotech counterparts.

Sometimes it pays, in the long run, to shell out a bit more money for a higher quality part for your vehicle. Mevotech’s components probably aren’t going to break on you after a few months however it is often better to pay that bit extra for something that is going to last a bit longer.

I don’t think that Mevotech is a bad brand if you want to save a bit of money and they do produce good suspension system parts but I would choose Moog first.

David Borgogni

David has been working with cars for over 10 years and is a freelance writer who specializes in automotive technology. He covers the topics that matter most to the consumer. Anything new in the automotive industry? David will likely be able to tell you about it.

Leave a Reply